Odyssey Double Wide Stroke Lab Putter

Bike Light Super Bright Bike Headlight Bicycle Cycling Light Lamp Safety Flashlight Rechargeable Bike Front Light

Features: Sewn very well, comfortable to wear. Fastener tape on the cuff, convenient and comfortable to wear the gloves. Microfiber leather on the palm, hard-wearing and great fit. Mesh cloth on the back of hand makes the gloves breathable. Specially designed for sports lovers.

Mit diesem Schuh gelingt Dir ein Blick hinter das Gewöhnliche! Dieser vom Runningsport inspirierte Sneaker mit Mesh-Obermaterial ist mit wenigen, cleanen Details ausgestattet und bietet einen modernen Look für Deine Füße: Der adidas Questar Ride Women!Freizeit-Schuh für Damen!Eigenschaften: Obermaterial: MeshInnenmaterial: TextilMaterial Decksohle: Schaum mit Textil-Oberfläche Material Laufsohle: GummiVerschluss: Schnürung Passform: Fällt normal aus Mesh-Obermaterial mit wenigen OverlaysTextilschlaufe an der Zunge und an der FerseTPU-Fersenspange mit eingeprägtem Questar RIDE Schriftzugadidas Schriftzug auf der Zunge aufgedrucktNahtlose 3 Streifen sind an beiden Seiten aufgeklebtBequemes Textilfutter mit Schaumpolsterung: Dieser Schuh ist speziell im Knöchel- und Fersenbereich mit Foam gepolstert und dadurch bequem zu tragen Herausnehmbare Ortholite Innensohle für eine fußspezifische Passform und ein angenehmes Tragegefühl ab dem ersten Schritt Dicke cloudfoam Zwischensohle kombiniert eine cloudfoam Zwischensohle mit einem superweichen Einsatz für ultimativen Komfort Außensohle: Gummi mit Dreieckprofil und einigen Aussparungen

Specification: Red laser Output Power 3-5mW   Batteries  One(1) 3V CR1/3N  Battery  Dispersion Approx. 1 inch to 99 yard   Wavelength 635 a 650 nm   Range in optimum conditions 450 metros / 800 yard

Unsere beliebtesten Aerobic-Gewichtsstangen. Eignen sich für Sit-ups, Kniebeugen, Ausfallschritte, Schulterdrücken u.v.m. Weiche Schaumstoffoberfläche für eine lange Haltbarkeit und Griffigkeit. Alle Stangen sind 120 cm lang. Jede Stange hat eine nummerierte Gummi-Endkappe.

MR. JUMP, the fiber helmet studied in details for comfort, technology and for sure safety for end user. It has been studied and tested to optimize the outside and inside air flows.
OUTER SHELL in tricarboco material, mix of Kevlar, carbon and fibre, joint through resin hand made using new technologies, which foresee aramidic resins. 2 different shell sizes: XS-L and XL-2XL
INTERNAL POLYSTYRENE protective lining, available in three sizes (S, M and L). The special shape and construction in different density increases mechanical resistance in the event of accidental shock. Inner channels studied in the wind tunnel guarantee a perfect ventilation.
The D-RING RETENTION SYSTEM has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding.
MRJUMP is homologated as per the following rules: ECE 22-05, DOT, JIS, INMETRO NBR 7471
CHEEK PADS completely removable and washable, with different thickness to get a perfect customization od the helmet.
INTERNAL SHELL completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in the internal part of the helmet and to let off the hot air through the back part.
INNER (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA. The SHELL is in polystyrene with channels for air flows. In the front part there are upper and back air ventilations, which help the internal helmet ventilation. On the CHIN GUARD there is an air ventilation for the front ventilation.
The OUTER SHELL has ribs to channel better the air flows. The PEAK has an aereodynamic impact. The wide open space in the front allows the use of any kind of glasses.
weigth: ca. 1000gr