SRAM RED, GXP 11 Speed Chainset-50/34T-175mm

MR. JUMP, the fiber helmet studied in details for comfort, technology and for sure safety for end user. It has been studied and tested to optimize the outside and inside air flows.
OUTER SHELL in tricarboco material, mix of Kevlar, carbon and fibre, joint through resin hand made using new technologies, which foresee aramidic resins. 2 different shell sizes: XS-L and XL-2XL
INTERNAL POLYSTYRENE protective lining, available in three sizes (S, M and L). The special shape and construction in different density increases mechanical resistance in the event of accidental shock. Inner channels studied in the wind tunnel guarantee a perfect ventilation.
The D-RING RETENTION SYSTEM has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding.
MRJUMP is homologated as per the following rules: ECE 22-05, DOT, JIS, INMETRO NBR 7471
CHEEK PADS completely removable and washable, with different thickness to get a perfect customization od the helmet.
INTERNAL SHELL completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in the internal part of the helmet and to let off the hot air through the back part.
INNER (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA. The SHELL is in polystyrene with channels for air flows. In the front part there are upper and back air ventilations, which help the internal helmet ventilation. On the CHIN GUARD there is an air ventilation for the front ventilation.
The OUTER SHELL has ribs to channel better the air flows. The PEAK has an aereodynamic impact. The wide open space in the front allows the use of any kind of glasses.
weigth: ca. 1000gr

Give your bike a cool new look!The super stylish Stingray range compliments the popular Bluemels range with a selection of modern colours within a matt black design. Includes all black stainless steel stays and hardware for the ultimate finishing touch.Size: 28” / 700c

All the jerseys are the same as those selling in official sales,Antiwrinkle, anti - static, can absorb sweat, anti - odor, anti - shrinkage water

Features: Tight and unique design shapes your body and makes your cycling more attractive. Designed to follow the body lines of a cyclist. Fashion design for the cloth with good function keeps you drying and cooling. Lycra power mesh bib straps and back keeps you more ease. Breathable material makes your cycling more comfortable. Seamless, antibacterial padis healthier.

Markenfahrräder bei RADONLINE.de - JERSEY RT (11,1 Ah): Raleigh JERSEY RT (11,1 Ah), 7 Gang, Damenfahrrad, Wave, Modell 2019, 28 Zoll 7, 6061 Aluminium, Magura HS11, hydraulische Felgenbremse, Concept, geöst, Schwalbe Energizer Life, 40-622, Selle Bassano Volare ,

In the wild world of the motocross helmets, a new star is born today: its name is Subeverter. Nomen omen Latin stated, and the new offroad model of the LS2 range represents the perfect expression of the name thanks to its extreme and absolute innovating specifi cs looking to comfort, safety and look. Made with the ultra-light KPA, the new Subverter is offering, above all, a security sliding structure with a double injection of EPS, to guarantee an exceptional protection on impacts. Subertver is ready to fi ght for new big and dusty challenges on the head of the motocross riders all over the world! LS2 helmets feature a Dynamic Flow-­through Ventilation. Fully adjustable intake ports and vented EPS work with the rear spoiler and exhaust ports to create a constant, light flow of air helping to keep the rider cool and comfortable. Features
Liner: Removable and Washable, breathable, hypoallergenic, laser-cut foam Certified: ECE 22.05 Shells: 3 Long Oval Weight: 1390+-50 gr Security: safety sliding structure, double D ring, emergency release system, reinforced chin strap, metal security plate