Tipo:Xenon HID; Potencia (W):35; Color temperatura:8000K; Luz:Alto; Soporte de Lámpara:H7; Color de la Luz:Azul; Dimensiones de Unidad / L x A x L (cm):17125.5; Peso Neto (kg):0.2; Función:Linterna de Cabeza; Material:vidrio,ABS; Características:Impermeable,De Alto Rendimiento; Voltaje de Entrada:CC,CA,12V
Tipo:Faros Antiniebla,Luz de marcha atrás,Luz de Freno; Flujo Luminoso (lm):700-800; Temperatura del Color (K):6500-7000; Vida útil (h):> 50000; Voltaje:DC 12V; Base de la Bombilla:1156; Color de Luz:Blanco Frío; Medidas (cm):3.51.91.9; Contenido del Paquete:1 Par de Focos LED; Potencia:9W; Características:De Alto Rendimiento,Luz Dirigida; Material:Aluminio; Tipo de Chip:LED SMD; Aplicación primaria:Coche
Material:Plástico; Color:Negro; Dimensiones (cm):27.7x 20.6x 3.5; Peso (kg):0.29; Voltaje:12V; Audio:Sistema de Alarma/Desalarma; Aplicación:Motocicleta; Rango de Distancia:80~150 m
Tipo:MP3; Color:Azul,Plata,Rojo,Negro; Dimensiones (L x A x D, mm):412715; Peso neto (KG):0.012; Formatos de audio:MP3; Slot de expansión:Tarjeta Micro SD; Idioma:Inglés; Qué hay en la caja:1 x Reproductor MP3
Catégorie:Caméra de recul; Capteur d'Image:Capteur CCD 1/4 pouce; Résolution Vidéo:720 x 480; Grand Angle:170 Degrés; Que contient la boîte:1 x scie à trou,1 x câble RCA,1 x manuel,1 x caméra de vision arrière,1 x Câble d'Alimentation; Connexion:Câblé; Résolution horizontale:480 TVL; Balance des blancs:Automatique; Type d'installation:Autre; Système vidéo:NTSC; Matériel Lens:Verre; Niveau imperméable:IP68; Marque:ZIQIAO; Longueur du Câble:6.0M (20ft); Caractéristiques:Imperméable; Pour:Automatique; date d'inscription:09/10/2019; Produits spéciaux sélectionnés:COD
EL-50448 Tire Pressure Monitor Sensor TPMS Activation ToolDescription:1. Use EL-50448 or equivalent tools to diagnose sensor function:Each sensor is equipped with a low frequency coil. When the tire pressure monitoring isused to enable mode, the low frequency transmission signal of the starting sensor is generated.In the read mode, the sensor responds to the low frequency start by transmitting the signal.In the tire pressure monitor read mode, when the body control module receives a read mode signal transmission,sensor identification code assigned to and read in order corresponding to the position of the vehicle.2. Sensor function - the use of pressure increase / decrease methodIn a static mode, each sensor is sampled at a pressure measurement every 30 seconds.If the tire pressure is increased or reduced by more than 1.2 (LB / sq ft) compared with the previous measurement,it will be immediately re measured to confirm the pressure change value. If the pressure does change, the sensor istransmitted in a read mode. In the tire pressure monitor read mode, when the body control module receives a read modesignal transmission, sensor identification codes are allocated to the vehicle and read in order corresponding to the position.Feature:Type: Tire Pressure Reset instrumentDetection System: BuickModel: EL-50448Power supply voltage: GM models el50448 (V)Package Included:1 X Tire Pressure Monitor Relearn Tool1 X Battery1 X Charger
C1 Car Head-Up Display LED Color Screen HUD GPS Speed Warning OBD2 Fault Code Elimination Car Diagnostic Tool Windscreen ProjectorIntroduction:HUD short for Head Up Display,The main function is to display the car dashboard information (e.g.speed,RPM,watertemperature,voltage,trip distance etc ),and keep the driver eyes always on road to avoid the risk of lowering downhead to read the dashboard.KindlyAttention:OBD2mode working voltage: 11V~18VDC (12vdc/200mA), when voltage is higher than 24v, please use a USB cable for GPS mode.System selection:When HUD is power on, Pull up the setting button to select the language and systems. Default system is OBD.Key functions:1.USB input2.Setting button(can pull up,pull down,short press in,long press in)3.power buttonSetting button functions: When the setting button in the left1. Short press in(quick press in the button and release within 1 second):(1)to switch the display mode (2)to choose menuafter entering the setup menu2 .Long press in(press in the button more than 2 seconds and release):(1)to enter the setting menu (2)to save and exit after setting3 .Pull up:(1)to switch the functions in the left area (2)to change the setting options4. Pull down:(1)to switch the functions in the right area (2)to change the setting optionsPull left/right to switch the multi functions areaBelow are the functions abbreviations:ECT - Engine Coolant TemperatureVLT - VoltageFUE - Fuel ConsumptionRPM - Revolutions Per MinuteODO - OdometerTIM - Driving TimeDIS
