Eigenschaften: Einfach zu transportieren, muss nur in die hohle Zahnplatte gesteckt werden. Machen Sie sich keine Sorgen, dass Sie die Werkzeuge nicht vergessen.Universalgelenkeinstellung, bequemer und schneller zu bedienen.Aus hochfester Stahlachse, Serie 7 aus Aluminiumlegierung, Spezialstahl für S-2-Werkzeug, das nicht einfach zu tragen ist.Die magische Schnalle kann zur Sicherung im Werkzeug gespeichert werden.Exquisite Verarbeitung, High-End und schönes Aussehen.Enthalten ein Innensechskantwerkzeug mit 3/4/5/6 #, Kreuzschlitzbit und Pflaumenblütenwerkzeug T-25.Einfach zu bedienen und praktisch, hat eine lange Lebensdauer. Es ist ein perfektes Werkzeug für das Fahrrad. Spezifikationen: Material: AluminiumlegierungFarbe: schwarz, rot, blau, lila, grün (optional)Geeignet für SHIMANO, HOLLOWTECH, LL, RACE FACE CINCH, SRAM.Einzelteilgewicht: 112g / 4.0ouncePackungsgröße: 130 x 50 x 50 mm / 5,1 x 2,0 x 2,0 ZollPaketgewicht: 145g / 5,1 Unzen Lieferinhalt: 1 x MultifunktionsschraubendreherDetailbilder:
Features:
Brand new and fine quality.
Spring loaded for easy use.
Automatic rebound function.
Carbon steel hardening treatment.
Light weight, thin profile and easy handling insulate grips comfortable for operation.
Feel comfortable and convenient to use?
Special suitable for cut wire, electronic feet, trimming plastic products, cut a small metal wire, and so on.
Used in electronic industry repair, jewelry processing, model making and fishing, etc.
drei schwarze Dekoelemente, jeweils mit einer LED-Beleuchtung. Komplettset mit Becken, Abdeckplatte, Pumpe, Beleuchtung und Anschlussmaterial Technische Daten: Material: PolystonePumpe 1600 l/h, 35W,Becken 90l,LED 3 x 8, 3WMaße: H 16 / H35 x Ø20 cm, H 50 x Ø 12 cmFarbe: schwarz
Features:
Adopt ARM Cortex-M3 processor (STM32 chip) and it runs faster than DSO138 and a good handle of data.
Used for secondary development on the basis of this kit, for example, it can be changed to Millivoltmeter, data loggers.
With Auto/Normal/Single trigger modes, easy to capture the moment waveform.
Available rising or falling edge trigger and with adjustable trigger level position and instructions.
Observable previous waveform before trigger(negative delay).
Can freeze waveform display at any time(HOLD function).
With waveform parameter digital display, including frequency, period, pulse width, duty ratio, MAX./MIN./AVG./Peak-Peak/virtual values.
Waveform storage function: will not lose the waveform after power off.
Short-circuit and open-circuit detection: can help the user find out the soldering error.
Great DIY kit and fun to make your own oscilloscope, especially suitable for electronic enthusiast who are interested in soldering and STM32.
TFT controller recognition function with cool black case.
Come with instructions, easy to install and operate.
The SMD has been soldered, more suitable for electronic beginner.
Notice:When you receive this DIY kit, please don't solder it before connecting with DC 9V 200mA power supply to test the circuit board(no more than 10V, or it may be burned).
The Starrett Deep Cut Bi Metal Holesaws combine the tried and tested tooth form used on the previous Dual Pitch Holesaw, with a new tooth material for enhanced heat and wear resistance. The Deep Cut saw also features an increased hole saw depth of 51mm (2in), and is ideal for cutting metal of more than 3mm thickness, tubes with a wall thickness of greater than 3mm and wood up to 51mm (2in) thick. Cutting Depth: 51mm.Starrett DCH0138 Deep Cut Bi Metal Holesaw has the following specification: Diameter: 35mm (1.3/8in).
Features:
Designed to detect the metal parts of various sizes by proper operation.
2 modes for Detection Indication: sound alarm or vibration alarm mode.
Red LED light indicates the detection of metal.
Low sensitivity button for scanning bigger metal objects only.
Powered by a 9V standard or rechargeable battery (not included).
Earphone sound mode to the buzzer for using in noisy environment.
Handheld design, convenient to use.
