GiFi Power 2500mAh 27.7Wh 20C 11.1V LiPo Battery for Parrot Bebop 3.0 RC Quadcopter Drone

Features: 2 in 1, can be V-mount battery plate and battery charger. Support 110 ~ 240V AC power supply, great for indoor long time shooting. You can switch power supply between battery and AC power freely, PMIC(Power Management IC)technology ensure no power interruption. Multiple output ports: 5V 2A / 8V 5A / 12V 5A / 14.8V / USB. Large output power, suitable for cameras adopting 7V -9V V-mount battery, and the 14.8V output port support most large camcorders of 12V -16.8V wide voltage input. The detachable rod clamps can be mounted on 15mm rods, 90angle adjustable. A belt clip on the back for hanging the battery plate. All metal constructed, hard and durable. The AC adapter port and BP charger port allow multiple stack to extend out multiple output interfaces for devices/cases in need of multiple input supplies.

Features: Rechargeable Li-po battery. Equipped with portable bag and tape easy to carry and use. High power and high capacity. Environmental friendly material. Stable output current, protect your RC drone. Sustaining high rate discharge and durable in use. Suitable for JJPRO P175 P200 QAV180 200 250 280 RC quadcopter.

The NEW i2 charger from Nitecore improves upon the original model with six new features:100% Charging AccelerationActive Current Distribution TechnologyExpanded Compatibility to Support 3.7V and 4.35V batteriesIMR Battery RestorationAutomatic Current Selection Based on Battery CapacityAutomatic Detection of Non-Rechargeable Lithium Batteries100% Charging acceleration means the NEW i2 can charge at up to 1000mA current in one slot.Active current distribution (ACD) technology allows for the dynamic distribution of the NEW i2's charging power. For example, when two batteries are being charged in the NEW i2 and one of them completes charging, all charging power will automatically go to the other slot and charge the battery at the fastest speed.Expanded compatibility to support 3.7V and 4.35V batteries allows you to charge a host of batteries with a single charger. Compatible with 1.2V, 3.7V, 4.2V and 4.35V. By simple operation with the V button it is easy to set charging voltage in each slot independently.IMR battery restoration will attempt to restore deeply discharged cells by pressing and holding both the C and V buttons simultaneously.The NEW i2 can intelligently select the most appropriate charging current based on automatic battery capacity detectionSafety features include:Optimisation for IMR charging by monitoring the voltage stays within safe limitsOvertime charging protection, limiting to 20 hoursMade from fire retardant, flame resistant materialsAutomatic Intelligent Temperature Control preventing overheatingCompatible with Li-ion/IMR/LiFePO4: 10340, 10350, 10440, 10500, 12340, 12500, 12650, 13450, 13500, 13650, 14350, 14430, 14500, 14650, 16500, 16345 (RCR123), 16650, 17350, 17500, 17650, 17670, 18350, 18490, 18500, 18650, 18700, 20700, 21700, 22500, 22650, 25500, 26500, 26650 and Ni-MH (NiCd): AA, AAA, AAAA, C, D.Input: AC 100~240V 50/60Hz 0.25A (max) 8W
DC 9~12VOutput:4.35V±1%/4.2V±1%/3.7V±1%/1.48V±1%
500mAx2/1000mA x1Dimensions: 132 mm x 70 mm x 35 mmWeight: 126 g (excluding batteries and power cord)UK Mains Plug included

HR6B4 Stay Charged AA 4x Batteries 1300mAh

Features: TATTU professional LiPo battery: superior Japan and Korea Lithium Polymer raw materials Quickly Recharged: long cycle life (150 times minimum), up to 200Wh/kg energy density. Stable and large capacity: stable automatic stacking technology enables single cell capacities of 450mAh. Suitable for multiple quadcopters: can be used for drones with the same size, voltage and connector batteries. Safety: All TATTU LiPo are packed with vibration-proof fire-proof material and our luxury battery box ensuring you get your battery in perfect condition.

Features: This battery grip/holder is compatible with Canon EOS 600D 550DRebel T3i T2i DSLR cameras. It supports features such as AE lock and FE lock, and retainsaccess to the Index/Reduce button, main dial, AF-Point Selectbutton, and Aperture/Exposure Compensation Buttons. Comes with battery holders for 1 * LP-E8 battery and 6 * AAbatteries, effectively increase the camera operating time. Has a tripod socket.