Type:Xénon HID; Puissance (W):55; Température de couleur:4300K; Rayon:Combinaison; Puissance de sortie de ballast (W):55; Douille de lampe:9004; Couleur de la lumière:Blanc chaud; Dimensions/LxLxH:12115; Poids net (kg):0.205; Que contient la boîte:x xénon HID Ampoule; Fonction:Lampe Frontale; Matériau:ABS," PCB plastique résistant à l'eau époxy couverture,Plastique,verre; Caractéristiques:Pare-vent,Etanche,CANBUS,Puissance élevée; Tension d'entrée:12 ~ 24V,12V,DC; Pour:Automatique
Tipo:LED; Soporte de Lámpara:T10; Color de la Luz:Blanco; Dimensiones de Unidad / L x A x L (cm):1.761 x 1.003 x 0.98; Peso Neto (kg):0.003; Función:Luz Para La Placa del Coche,Luz de Lectura,Luz Instrumental,Luz para el Día; Características:Decorativo
EL-50448 Auto Tire Pressure Monitor Sensor Car TPMS Activation Reset Tool OEC-T5 for GM/Opel MotorDescription:For GM vehicles equipped with a 315 or 433 MHz Tire Pressure Monitoring (TPM) system, a Sensor Re-Learn Procedure must be performed after tire rotations, Remote Control Door Lock Receiver Module replacement or Tire Pressure Sensor replacement. This re-learn procedure can be performed by using special tool EL-50448.Also works on 2014 GM modelsThe tire pressure sensor on models inafter 2012 can be read, only with some specified diagnostic tools.EL-50448 Instructions:EL50448 works on all General Motors (Buick, Cadillac, Chevrolet, GMC) products manufactured for the North American market. It wont work if youve purchased aftermarket sensors that are the wrong frequency. EL50448 fit for G.M most kind of vehicles, equipped with a 315 or 433 MHz Tire Pressure Monitoring (TPM) system. This re-learn procedure can be performed by using special tool EL-50448.Before tire pressure monitoring system works normally properly, the body control module will record ID information of each position in the tire pressure sensor; and use the following methods to read the tire pressure sensor after replacing a tire or wheel speed sensor. Please refer to the specific methods as follows:Using Instruction:Step 1 - Enter leaning modeSet the gearshift lever to PPut the ignition switch to ONEnter the interface of tire pressure display by DICDIC shows Press Set / Ctrl to re-learnPress Set / CtrlThe
